Locate the reset button next to the CAT5 (RJ45) connection. Press and hold the reset button for 10 seconds and then let go. You should see your 10/100 LAN connection at your computer go away and then come back. That will confirm a reset has occurred. The unit settings should all be back to default including its IP address of 192.168.1.1.
How do I set up the AP WDS Repeater?
Click here for instructions.
How to setup WDS Bridge.
Click here for instructions.
How do I set up the device under Apple MAC OS X environment?
Click
here for instructions.
I cannot connect or maintain a log in to the device.
We recommend using internet explorer with at least IE7 or higher. Make sure you have the latest version of Java script.
What is spanning tree protocol?
When there are several possible paths a packet can route to (redundant links for increased reliability for example), a loop can occur (jamming up the network). It is used to prevent these loops.
What is the default gateway?
The default gateway is your router’s IP address. The default gateway information is not required, but is recommended.
What is the default user name and password to log into this device?
Log in name is “admin” and password is “admin” by default.
What is the WDS Mode?
Stands for Wireless Distribution System. Allows access points to link together and provide repeating. Note however, this repeating comes at a cost of reduced bandwidth. Bandwidth will be reduced by 30-40%, and it is recommended that NO multiple repeating hops be done for this reason.
